Crystal Structures and Phase Behavior of Sulfadiazine and a Method for the Preparation of Aggregates with Good Performance

The solvate and the solvent‐free form of sulfadiazine (SD) were investigated. SD was found to exist in one solvent‐free form and the N‐methylpyrrolidone (NMP) solvate form. The NMP solvate was shown to be a channel‐type compound. The intrinsic properties of the solvents were used to evaluate the effects of solubility on the phase transformation of SD and the NMP solvate. The SD phase could transform to the NMP solvate by NMP‐mediated phase transformation, which was governed by crystallization of the NMP solvate. The crystalline NMP solvate could transform to the solvent‐free solid state through solid‐solid transformation upon heating or water penetration‐mediated phase transformation. The rate of this water penetration‐mediated phase transformation of the NMP solvate to SD was unusually fast. It can be used to obtain SD aggregates of well‐defined shape and good powder properties.     

Influence of whisker-aspect-ratio on densification,microstructure and mechanical properties of Al2O3 whiskers-reinforced CeO2-stabilized ZrO2 composites

A novel composite of 12 mol% CeO₂-stablized tetragonal ZrO₂ reinforced with Al₂O₃ whiskers (designated as Ce-TZP/A_w) has been prepared and studied in this work. The objective of this investigation was to systematically study the influence of whisker-aspect-ratio on the densification behaviors, microstructure evolution, and mechanical properties of Ce-TZP/A_w composite. Results showed that the sintered density of composite increased and the grain growth tended to diminish with the decrease in whisker aspect radio. Both the fracture toughness and flexural strength reached maximum values of 475 ± 12 MPa and 11.4 ± 0.2 MPa m^1/2, respectively at a whisker aspect ratio of about 12. It was also observed that the fracture toughness, flexural strength and tetragonal to monoclinic ZrO₂ transformation of the dual-phase composite exhibited similar variation trend as a function of the whisker-aspect-ratio, which suggested that the stress-induced phase transformation should be the main toughening and strengthening mechanism in the Ce-TZP/A_w composite.     

基于多参数特征保留的载荷谱加速耐久性编辑

为了得到时间更短加载效果相同的加速耐久性试验载荷谱,提出了基于多参数特征保留的载荷谱编辑方法。该方法同时考虑载荷谱的损伤、功率谱密度以及统计参数等信息,对零部件载荷谱的时间进行压缩。以汽车悬架螺旋弹簧的载荷谱为例,采用该方法进行缩减,同时从多个参数特征方面与传统的基于损伤保留的编辑方法所得到的载荷谱进行对比。为了进一步验证编辑效果,采用编辑谱和原始谱对弹簧进行疲劳仿真。结果表明,该方法能够有效缩短汽车零部件的载荷谱,可得到与原始载荷谱具有相同加载效果的编辑载荷谱。     

快速凝固高硅铝合金加热过程中的组织转变

利用气雾化法制备高硅铝合金粉末,采用光学显微镜(OM)、扫描电镜(SEM)等现代测试手段,分析快速凝固高硅铝合金不同粒度粉末微观组织和结构特征,研究在不同加热温度和保温时间条件下针状富铁相的转变特性及β-Si相的粗化行为。结果表明:快速凝固高硅铝合金组织主要以基体上分布有大量细小的颗粒状和针状相为特征,合金粉末在加热过程中,随着温度的升高和保温时间的延长,颗粒β-Si相有粗化趋势,针状非平衡富铁相转变为棒状或颗粒状平衡相。通过台阶式连续加热模拟试验可获得针状相基本消失且颗粒β-Si相未发生明显粗化的组织。     

Phase Field Modelling Allotropic Transformation of Solid Solution

Based on multiphase field conception and integrated with the idea of vectorvalued phase field, a phase field model for typical allotropic transformation of solid solution is proposed. The model takes the non-uniform distribution of grain boundaries of parent phase and crystal orientation into account in proper way, as being illustrated by the simulation of austenite to ferrite transformation in low carbon steel. It is found that the misorientation dependent grain boundary mobility shows strong influence on the formation of ferrite morphology comparing with the weak effect exerted by misorientation dependent grain boundary energy. The evolution of various types of grain boundaries are quantitatively characterized in terms of its respective grain boundary energy dissipation. The simulated ferrite fraction agrees well with the expectation from phase diagram, which verifies this model.     

Transformation of Nanomaterials and Its Implications in Gut Nanotoxicology

Ingestion of engineered nanomaterials (ENMs) is inevitable due to their widespread utilization in the agrifood industry. Safety evaluation has become pivotal to identify the consequences on human health of exposure to these ingested ENMs. Much of the current understanding of nanotoxicology in the gastrointestinal tract (GIT) is derived from studies utilizing pristine ENMs. In reality, agrifood ENMs interact with their microenvironment, and undergo multiple physicochemical transformations, such as aggregation/agglomeration, dissolution, speciation change, and surface characteristics alteration, across their life cycle from synthesis to consumption. This work sieves out the implications of ENM transformations on their behavior, stability, and reactivity in food and product matrices and through the GIT, in relation to measured toxicological profiles. In particular, a strong emphasis is given to understand the mechanisms through which these transformations can affect ENM induced gut nanotoxicity.     

铁氧化物在流化床温度和CO气氛下的形态迁移及其对NO催化还原

利用小型固定床实验台实验研究了铁氧化物在典型流化床温度和CO还原性气氛下的形态迁移及其生成物对NO的催化还原作用，采用分级还原结合X射线衍射（XRD）表征分析，确定铁氧化物与CO和NO反应后生成物的价态及各种铁氧化物对NO的还原机制。结果表明，Fe₂O₃在实验条件下可依次被CO还原为Fe₃O₄、FeO和单质铁，反应过程中随着还原度的增加，还原速率逐级下降，从Fe₂O₃还原到Fe₃O₄的速率最高，FeO还原到Fe速率最低，在实验温度范围内，床温升高有利于提高Fe₂O₃到Fe₃O₄的还原速率和还原度。不同形态的铁氧化物对NO的催化还原特性不同，Fe₂O₃及其部分还原后生成的Fe₃O₄都不能直接与NO反应，Fe₂O₃对CO催化还原NO的效果很弱，而Fe₃O₄对CO还原NO的反应却有很强的催化作用，而进一步还原生成FeO与单质铁还可直接与NO反应。     

基于儒可夫斯基变换的涡轮钻具叶片设计及性能分析

为提高涡轮钻具叶片使用性能和创新叶片设计理论,提出了基于儒可夫斯基保角变换法与经典水力翼型相结合的涡轮钻具叶片设计新方法,以?127涡轮钻具叶片为研究对象,运用搭建的涡轮钻具叶型参数化设计平台和自主设计的涡轮钻具性能测试台架,完成了5种翼型的造型设计,研究了5种叶片流场性能,开展了设计叶片的性能测试实验,对比分析了设计叶片与塔里木油田某型在役?127涡轮叶片的实际效能。实验及仿真结果表明,基于新方法设计的NACA-0012翼型加厚叶片在600 r/min转速及15 L/s流量的设计工况下,其单级扭矩达5.83 N·m,较相同条件下某在役?127涡轮的单级扭矩提高约6.4%,级效率提高约1.16%,整体性能有了实质提升。     

热处理工艺对30MnCrNiMo高强钢组织与性能的影响

借助全自动淬火膨胀仪测定钢的Ac₁、Ac₃相变点,通过对试验钢进行淬火+亚温淬火+回火热处理和淬火+回火热处理,研究了两种热处理工艺下30MnCrNiMo高强钢的组织与性能。结果表明:30MnCrNiMo高强钢的Ac₁、Ac₃相变点分别为653、807 ℃。采用淬火+亚温淬火+回火的热处理工艺所获得的马氏体和铁素体复相组织比直接淬火+回火得到的全马氏体组织更为细小、均匀,试验钢的屈服强度为1499 MPa,伸长率为14.0%,室温、-40 ℃冲击吸收能量分别为35.5和29.5 J,钢的塑性和冲击性能显著提升,有效改善了30MnCrNiMo高强钢的强韧性能。